EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Cost Controller is really a hugely successful photo voltaic controller suitable for off-grid solar devices. Determined by multiphase synchronous rectification technological innovation, it makes certain optimized Electrical power conversion and procedure stability for a wide array of photovoltaic (PV) purposes.
Important Options of your EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Cost Controller technological know-how for top-quality photo voltaic Electrical power harvesting. Key features include:
Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Sophisticated MPPT Algorithm with >99% efficiency.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Exhibit with authentic-time details checking.
Various Load Command Modes together with handbook and timer.
Detailed Digital Protections in opposition to overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Stage Manual to Establishing the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Be certain all elements are integrated: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Verify the product range and voltage rankings match your solar panel and battery technical specs.
two. Mounting the Cost Controller
Pick a nicely-ventilated, dry place near the battery lender.
Safe the Tracer AN controller using the supplied mounting brackets.
Maintain good clearance for warmth dissipation.
3. Wiring the Solar Demand Controller
Warning: Often adhere to proper protection protocols and ensure the method is run off just before connecting elements.
Stage one: Hook up the battery terminals for the charge controller (favourable to constructive, adverse to damaging).
Step two: Hook up the solar panel array to the PV enter terminals.
Stage three: Connect the load terminals if using a immediate load connection.
Move four: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Options
Energy over the controller by connecting the battery initially.
Make use of the Liquid visit here crystal display display to navigate the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Manual, timer, light-weight Regulate.
five. Monitoring and Information Logging
The Tracer AN Series supports real-time checking utilizing the MT50 distant meter.
Facts is often logged through the RS485 conversation port using software package including Photo voltaic Station Personal computer.
Remote monitoring is possible Together with the EPEVER WiFi module.
six. Troubleshooting Frequent Issues
Challenge 1: No Electric power Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Difficulty 2: Around-Voltage Safety
Validate the solar array’s voltage score.
Adjust technique parameters if needed.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technology assures:
Greater Efficiency: Minimized Power losses through conversion.
Enhanced Dependability: Secure efficiency underneath variable loads.
For a longer time Battery Everyday living: Steady and precise charging profiles.
Conclusion
The EPEVER Solar Charge Controller with multiphase synchronous rectification technologies can be an Extraordinary option for optimizing solar power technology and increasing battery lifetime. By pursuing the above mentioned setup guide, consumers can be certain most efficiency and program longevity.